Front Door Camera And Outdoor Camera Features - Panasonic KX-HNB700 User Manual

Front door camera and outdoor camera features

Refer to the following after checking the general troubleshooting information described in "General
information", Page 135.
[Camera update failed] is displayed
R An error occurred while updating the camera.
→Fully charge the camera and try again.
I fully charged the camera (the charging LED indicator is lit in red), but its operation time seems
to be shorter than usual
R The temperature of the location where the camera is being used is too low.
→Use the camera in a location with a higher temperature.
The camera will not charge (the charging LED indicator blinks quickly in red)
R You are charging the camera in a location outside of the camera's specified charging temperatures.
→Charge the camera in a location with a temperature between 5 °C and 40 °C (41 °F and 104 °F).
No sound is heard in camera recordings
R If is displayed next to the recording in the recording list, the system is configured to not record audio
when recording camera images.
→Change the [Recording with Sound] setting ( "Recording sound", Page 96).
R The volume is turned down on your mobile device.
→Adjust the volume of your mobile device.
Colors in camera images appear different from normal
R The camera is aimed at a dark location, or it is nighttime.
→If there is not adequate light to illuminate the subject, such as at night, the camera switches to night
vision mode depending on the settings ( "Using night vision", Page 96). In this case, colors may
appear different from normal.
Colors in front door camera images appear washed out
R Lighting conditions are poor or inconsistent.
→Adjust the camera's brightness ( "Changing the brightness", Page 97).
→Place the camera in a different location or position.
Condensation forms on the camera
R Extreme temperature changes are causing condensation to form.
→Wipe the outer surface of the camera with a soft dry cloth.
→Use the camera in a location that does not have extreme temperature changes.
There is a long delay when talking to the camera while away from home
R Your mobile device's network connection is slow or congested.
→Wait for network traffic to decrease.
→Lower the [Frame Rate] setting ( "Changing the frame rate", Page 97).
Images are poor at night when the camera is installed in front of a window
R Night vision mode is causing images to have poor quality.
→Turn off night vision mode ( "Using night vision", Page 96).
LEDs light at night
R Night vision mode is enabled and automatically turns on LEDs at night.
→Turn off night vision mode or set it to [Monochrome] ( "Using night vision", Page 96).
Note:
R Turning off night vision mode will reduce the visibility of images at night.
Troubleshooting
147