Table of Contents
Advertisement
Using a shelf camera and floor camera
Adjusting the lighting
You can adjust the brightness of the camera's light and configure the light to turn on automatically
according to a schedule or when motion is detected, etc.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Lighting].
R Each setting is explained in this section.
Using a schedule
You can enable the schedule so that the light is turned on and off at specified times and you can also
specify the light to turn on and off at random times when you are away from home on a vacation, etc.
Tap [Use a Schedule] to enable the schedule.
R Slide
to specify the start time.
R Slide
to specify the end time.
R [Vacation Randomizer]: Turns the light on and off at random times within an hour of the times
specified in the schedule.
Turning on lights after detecting motion
You can enable the light to turn on if motion is detected when it is dark.
Tap [Motion Sensor] to enable the use of motion detection to turn on the light.
R [Duration]: Determines how the long the light will be lit after motion is detected.
Adjusting the brightness of the light
You can adjust the brightness level for when the light is turned on through a schedule or motion detection.
Slide the [Brightness] slider to the desired level.
Battery status
When backup batteries are used with the camera, you can check the status of the batteries.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [System].
R [Battery Status]: Displays the status of the batteries.
Note:
R When inserting or replacing batteries, disconnect the AC adaptor from the wall outlet before inserting
or replacing the batteries. If batteries are inserted or replaced with the AC adaptor connected to a wall
outlet, the battery status may not be updated or may be incorrect.
64
® [Settings].
® [Settings].
Hide quick links:
Advertisement
Table of Contents
