Motion Sensitivity; Disabling Detections When Leaving Your House; Detection Test - Panasonic KX-HNB700 User Manual

Using a front door camera and outdoor camera
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Detection] ® [Set Detection Area].
4
Tap the desired areas of the camera image.
R Gray areas of the camera image indicate areas for which image detection is disabled.
5
When finished, tap [OK].

Motion sensitivity

You can adjust the sensitivity of the camera's motion detection features.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Detection] ® [Motion Sensitivity].
4
Select the desired setting.
If you want to use the same sensitivity level for the IR sensor and video motion sensor:
– [High]: The sensors are very sensitive to changes, i.e., even a small change will trigger the
sensors.
– [Normal]: The sensors are moderately sensitive to changes.
– [Low]: The sensors are somewhat sensitive to changes.
If you want to use different sensitivity levels for the IR sensor and video motion sensor:
Tap [Advanced].
– [IR Sensor]: Determines sensitivity levels for the IR sensor.
– [Video Motion]: Determines sensitivity levels for the video motion sensor.
5
When finished, tap [OK].

Disabling detections when leaving your house

You can disable detections for when people leave your house.
This is convenient when you only want to detect people approaching your house and do not want to
detect people leaving your house.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Detection].
4
Slide the [Disable when leaving] switch to the desired position.
– When turned on: People leaving your house will not be detected.
– When turned off: People leaving your house will be detected.

Detection test

You can test which areas of the camera image can be detected while viewing live images from the
camera. This is useful when determining where to install cameras, and also which areas you should
enable or disable detection for.
1
From the [HomeHawk] app home screen, tap
2
Tap [Camera Settings] and select the desired camera.
3
Tap [Detection] ® [Detection Test].
98
® [Settings].
® [Settings].
® [Settings].