Device Led Indicators - Panasonic KX-HNB700 User Manual

The selected mode was changed
An error occurred
The shelf camera's or floor camera's sound sensor was triggered
The shelf camera's or floor camera's temperature sensor was triggered
The shelf camera's or floor camera's privacy mode was enabled
The shelf camera's or floor camera's privacy mode was disabled

Device LED indicators

Each device can provide information about its status by turning on its LED indicator.
Meaning of symbols used in this section
Indicator off
Indicator lit
Indicator blinking slowly
Indicator blinking
Indicator blinking quickly
Indicator blinking very quickly
Indicator blinking slowly in two colors
Indicator blinking in two colors
Access point LED indicator
Off
Green
Green or amber
(alternating)
Red
Amber
No power, or LED indicator is turned off
Power is on (normal operations)
camera or mobile device
Registration mode, updating
Obtaining an IP address, or accessing a microSD card
*2
Starting up
or
Registration failed
Power on until start up completed
Getting started with the HomeHawk!
*1
*1
, or registration completed for the
*1
25