Factory Reset:
1.) Navigate the menu until you reach Option, and press <ENTER>.
2.) Then navigate to Reset Default and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight Yes or No, and press <ENTER>.
Language:
Here you can choose your preferred menu display language.
1.) Navigate the menu until you reach Language, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight any available option, and press
<ENTER>.
3.) Press the <ENTER> button to confirm your selection.
Reset:
This reset option will reset the motors only (see device options for factory reset).
1.) Navigate the menu until you reach Reset, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight Yes (motor reset) or No (cancel).
3.) Press the <ENTER> button to confirm your selection.
Setup Options:
The setup menu contains password protected calibration and mic settings.
Password (password = 008)
1.) Navigate the menu until you reach Setup, and press <ENTER>.
2.) Then navigate to Password and press <ENTER>.
3.) Use the <UP/DOWN> buttons to enter the password which is 008, and press
<ENTER> to confirm your choice.
Calibration:
1.) Follow the instructions above to enter the password in the Setup menu.
2.) Navigate the menu until you reach Calibration, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to highlight any available option, and press
<ENTER>.
4.) Now use the <UP/DOWN> buttons to make any fine adjustments, and press
<ENTER> to confirm your choice.
Mic Sensitivity:
1.) Follow the instructions above to enter the password in the Setup menu.
2.) Navigate the menu until you reach Mic Sensitivity, and press <ENTER>.
3.) Use the <UP/DOWN> buttons to adjust the mic sensitivity level, ranging anywhere
from 0% to 100%.
4.) Press the <ENTER> button to confirm your selection.
Super-G™ 150 User Manual - Rev. A
Page 13
(c) 2018 Blizzard Lighting, LLC