Settings For The Video (Video Settings Menu); Settings For Hdmi (Hdmi Settings Menu); Audio Out - Sony 3-289-204-12(1) Operating Instructions Manual

Settings for the video
(Video settings menu)
You can use the Video settings menu to make
settings for video. Select "Video" in the
Settings menu. For details on adjusting the
parameters, see "7: Operating the receiver
using the GUI (Graphical User Interface)"
(page 39).
Video settings menu parameters
x Resolution
(Converting Video signals)
Lets you convert the resolution of analog video
input signals.
• DIRECT
• AUTO
• 480/576i
• 480/576p
• 720p
• 1080i
• 1080p
For details on operating, see "In the video
input/output conversion table classified by the
menu settings" (page 34).
Settings for HDMI
(HDMI settings menu)
You can use the HDMI menu to make the
required settings for components connected to
the HDMI jack. Select "HDMI" in the Settings
menu. For details on adjusting the parameters,
see "7: Operating the receiver using the GUI
(Graphical User Interface)" (page 39).
HDMI settings menu parameters
x Control for HDMI
Lets you turn the Control for HDMI function
on or off. For details, see "Control for HDMI"
(page 87).
x Audio Out
(Setting HDMI audio input)
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV, even if you play
back multi channel source.
• When you connect the receiver to an image
display component (projector, etc.), sound may
not be output from the receiver. In this case,
select "AMP".
• AMP
The HDMI audio signals from the playback
component is only output to speakers
connected to the receiver. The multi channel
sound can be played back as it is.
Note
Audio signals are not output from the TV speakers
when "Audio Out" is set to "AMP".
continued
57 US