Watching a DVD/Blu-ray Disc
• Refer to the operating
instructions supplied with the
TV and DVD player or Blu-ray
Select the audio format of the disc
to be played, if necessary.
You can select the sound field to
suit the movie or the music. Refer
to page 64 for details.
Check the following if you cannot
listen to the multi channel sound.
• Be sure the sound source
corresponds to the multi channel
format (the MULTI CHANNEL
DECODING lamp on the front
panel lights up during
• Be sure this receiver is
connected to the DVD player or
Blu-ray Disc Player via a digital
• Be sure the digital audio output
of the DVD player or Blu-ray
Disc Player is set up properly.
MULTI CHANNEL DECODING lamp
Turn on the TV and DVD player or Blu-ray
Turn on the receiver.
Press INPUT SELECTOR to select "DVD" or
You can also use INPUT SELECTOR on this receiver to
select "DVD" or "BD".
Switch the input of the TV so that an image
of the DVD or Blu-ray Disc is displayed.
Play back the disc.
Adjust to a suitable volume.
After you have finished watching a DVD or
Blu-ray Disc, eject the disc and turn off the
receiver, the TV, and the DVD player or Blu-
ray Disc Player.