x SW Level (Subwoofer level for
Lets you set the level of the subwoofer to 0 dB
or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for
each HDMI input independently.
The subwoofer level is automatically set to 0
dB or +10 dB depending on the sampling
• +10 dB
• 0 dB
Settings for the system
(System settings menu)
You can use the System settings menu to
customize the settings of the receiver. Select
"System" in the Settings menus. For details on
adjusting the parameters, see "7: Operating the
receiver using the GUI (Graphical User
Interface)" (page 39).
System settings menu
x RS-232C Control
The receiver can receive commands from the
The receiver does not receive commands
from the RS-232C port.