To cancel programming
Press RM SET UP during any step.
The RM SET UP indicator flashes 5 times in
quick succession. The remote automatically
exits the programming mode.
To activate the input after
Press the programmed button to activate the
input you want.
If programming is
unsuccessful, check the
• If the indicator does not light up in step 1, the
batteries are weak. Replace both batteries.
• If the indicator flashes 5 times in quick
succession while entering the numeric code,
an error has occurred. Start again from step
The numeric codes
corresponding to the
component and the maker of
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than
one numeric code may be assigned to a
component. If you fail to program your remote
using one of the codes, try using other codes.
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.
• All of the input buttons on this remote may not be
available when used with your particular
To control a CD player
To control a DAT deck
To control an MD deck
To control a tape deck
To control an LD player
101, 102, 103
105, 106, 107
108, 109, 110
112, 113, 114
115, 118, 119
120, 121, 122
206, 207, 208, 209
601, 602, 603