x D.Range Comp
(Dynamic range compressor)
Lets you compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volumes late at
night. Dynamic range compression is possible
with Dolby Digital sources only.
The dynamic range is compressed
The dynamic range is compressed as
intended by the recording engineer.
The dynamic range is applied automatically
with Dolby TrueHD source or other source is
set to "OFF".
The dynamic range is not compressed.
• Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
• "STD" is the standard setting, but it only enacts
light compression. Therefore, we recommend
using the "MAX" setting. This greatly compresses
the dynamic range and lets you view movies late at
night at low volumes. Unlike analog limiters, the
levels are predetermined and provide a very natural
x Distance Unit (Distance unit)
Lets you select the unit of measure for setting
The distance is displayed in meters.
The distance is displayed in feet.
Adjusting the equalizer
You can use following parameters to adjust the
tonal quality (bass/treble level) of all speakers,
and apply them. These settings are applied to
all sound fields and for each speaker.
• This function does not work in the following cases.
– The multi channel input is selected.
– Dolby TrueHD signals with a sampling
frequency of more than 96 kHz are being
– PCM signals with a sampling frequency of more
than 96 kHz are being received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
more than 96 kHz, the signals will always be
played back at 96 kHz.
Press GUI MODE repeatedly to
select "GUI ON".
"GUI MODE" appears on the display
window of the receiver and the GUI menu
appears on the TV screen. Press MENU
if the GUI menu does not appear on the