Press SHIFT, then press
numeric buttons to enter the
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
If you cannot tune in a station
"– – – .– – MHz" appears and then the display
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Presetting radio stations
You can preset up to 30 FM and 30 AM
stations. Then you can easily tune in the
stations you often listen to.
Press GUI MODE repeatedly to
select "GUI ON".
"GUI MODE" appears on the display
window of the receiver and the GUI menu
appears on the TV screen. Press MENU if
the GUI menu does not appear on the TV
Press V/v repeatedly to select
"FM" or "AM", then press
Tune in the station that you
want to preset using Automatic
Tuning (page 73) or Direct
Tuning (page 74).
In case of poor FM stereo reception,
switch the FM reception mode (page 74).
Press V/v to select "Memory",
Press V/v to select a preset
The station is stored as the selected preset