Alternative Network Configuration - Siemens OZW672.01 Commissioning Instructions

Manual
installation
Result
Note
Alternative
configuration
Siemens
Building Technologies
The RNDIS driver is supplied on the Web Server at http://<IP address>/drivers/
can be accessed via Ethernet connection (see Section 7.1.2 Access via home
network (LAN).
The driver
Siemens_RNDIS_Driver_x64.msi
system; on a 32-bit operating system Siemens_RNDIS_Driver_x86.msi. The
installation file for the driver can be executed directly on the PC. Following the
steps for the installation wizard.
The RNDIS driver is now installed.
The PC can communicate with the Web Server via USB.
The RNDIS driver is installed as part of the ACS790 Siemens software installation.
9.3.4

Alternative network configuration

We recommend setting up IP settings for commissioning as an alternative
configuration if a PC, connected to a network, is temporarily used to commission
the Web Server and the local area network.
On the PC, set as follows:
1. Select Start > Control Panel > Network Connections > Local Area Connection
2. Select the "General" tab.
3. Click [ Properties ]
Web Server OZW672... V6.0
Appendix
is installed on a 64-bit operating
CE1C5712en
131 / 143
2015-10-13