Mail Inbox - Siemens OZW672.01 Commissioning Instructions

"Energy indicator
transmitted" and
"Reason"
Note
Fault message e-mail
Reset
fault message
Note
92 / 143
Siemens
Building Technologies
The values of the data points "Energy indicator transmitted" and "Reason" are
displayed after testing until:
· Another test is triggered manually.
· The next transmitted e-mail is transmitted as per Transmit time 1 and/or 2.
· The device supply is switched on and off.
Data point
Test receiver
"Energy indicator transmitted"
Reason
Manual triggering for test purposes does not trigger a fault message.
If an e-mail with "Energy indicator" of the plant is not transmitted without error,
a fault message is triggered for the corresponding e-mail recipient.
The fault message is reset if:
· The next transmitted e-mail is transmitted as per Transmit time 1 and/or 2.
· Manually triggered "Test receiver" is successful.
The diagnostic options are identical to those of other e-mail recipients.
6.5.2

Mail inbox

Web Server OZW672... V6.0
"Energy indicator" function
Function
[ ---, trigger]
[ ---, Yes, No]
[ ---, DNS setting, mail server address, mail
server port number, e-mail address recipient,
mail server authentication, network cable]
CE1C5712en
2015-10-13