Configure E-Mail Receiver - Siemens OZW672.01 Commissioning Instructions

Send test e-mail to
receiver
Note
116 / 143
Siemens
Building Technologies
8.3.1

Configure E-mail receiver

OZW can send Trend data to a total of 2 e-mail receivers for each Trend channel.
The receiver addresses are set as follows:
1. In secondary navigation, click E-mail receiver.
The window with the e-mail addresses for both message receivers opens:
2. Click E-mail address of the desired receiver 1 or 2 or the red pencil
symbol .
The Edit window opens.
3. Enter the desired e-mail address.
4. Click OK.
You can send a test e-mail to the receiver to ensure the settings are correct.
1. Click Test receiver or the red pencil symbol .
2. In the Edit window, select Trigger.
3. Confirm with OK.
OZW sends a test e-mail to the entered receiver and confirms transmission
under data point Trend data sent with Yes..
If transmission failed, a possible cause is provided under Reason, see
Section 2.7 Functional check, "Test message receiver".
4. Check whether the e-mail arrived at the receiver.
E-mail receiver settings are retained when deleting or overwriting an existing Trend
definition.
Web Server OZW672... V6.0
Trend functions
CE1C5712en
2015-10-13