Configuration; Logging In - Siemens SIMATIC NET SINEMA Operating Instructions Manual

Configuration

3.1

Logging in

Logging on to SINEMA RC Server
1. Double-click on the "SINEMA RC Client" icon on your desktop.
Or in the menu "Start > All Programs > Siemens Automation > SIMATIC > SINEMA RC
Client" select the "SINEMA RC Client" entry.
2. Enter the IP address of the SINEMA RC Server:
If the SINEMA RC Server uses a port other than 443 as the HTTPS standard port, enter
the port number along with the server address (IP address or FQDN). A colon ":" must be
entered between the server address and the port number as a delimiter e.g.
192.168.234.1:6443 or my.server.org:6443
3. Log on to SINEMA RC with one of the following logon methods:
SINEMA Remote Connect - Client
Operating Instructions, 11/2017, C79000-G8976-C395-04
Logon method
User name / password
Smartcard
1. Enter the user name and the password.
Assuming that the user name and the password have been creat-
ed on the SINEMA RC Server.
With the system administrator ("admin" after installation) you can-
not log on to the SINEMA RC Client.
2. Click the "Log on" button.
Requirement
A card reader on the PC or notebook
•
The card reader is connected according to the manufacturer's
•
instructions and the driver belonging to it is installed.
A card with a valid end entity certificate.
•
The path to the library file pks11-dll is set, see section "General
•
settings (Page 22)"
1. Insert your card in the card reader device.
2. For the login method select "Smartcard".
3. Click the symbol "Smartcard PKI Login".
4. Enter your PIN and click the "OK" button
3
17