Alternative Network Configuration - Siemens OZW672 Series Commissioning Instructions

Manual
installation
Result
Note
Alternative
configuration
Siemens
Building Technologies
The RNDIS driver is supplied on the web server at http://<IP address>/drivers/
can be accessed via Ethernet connection (see Section 2.6.1).
The driver Siemens_RNDIS_Driver_x64.msi is installed on a 64-bit operating
system; on a 32-bit operating system Siemens_RNDIS_Driver_x86.msi. The
installation file for the driver can be executed directly on the PC. Following the
steps for the installation wizard.
The RNDIS driver is now installed.
The PC can communicate with the web server via USB.
The RNDIS driver is installed as part of the ACS790 Siemens software installation.
7.3.4

Alternative network configuration

We recommend setting up IP settings for commissioning as an alternative configu-
ration if a PC, connected to a network, is temporarily used to commission the web
server and the local area network.
On the PC, set as follows:
1. Select Start > Control Panel > Network Connections > Local Area Connection
2. Select the "General" tab.
3. Click [ Properties ]
Continued on next page.
Web server OZW672... V4.0
Appendix
103 / 116
CE1C5712en
28.08.2012