Table of Contents
Advertisement
56
(FIG 15-2)
Dual Accessory Mounted with after-market
voltage meter mounted above
Once your dual input and USB charge port are installed as shown in FIG 15-2, you can connect
the USB to the source unit connector and the 3.5mm RCA connectors to the source unit AUX-1
input. After the TEST & TUNE chapter has been completed, you should zip tie up any excess
cables.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
Table of Contents
