Hifonics HIF-STG3-1 Installation Manual
  1. Manuals
  2. Brands
  3. Hifonics Manuals
  4. Car Stereo System
  5. HIF-STG3-1
  6. Installation manual
Hifonics HIF-STG3-1 Installation Manual

Hifonics HIF-STG3-1 Installation Manual

Stage 3, 1000 watt five speaker rzr tuned audio package
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1
HIF-STG3-1
STAGE 3, 1000 WATT FIVE SPEAKER
RZR Tuned Audio Package
Installation Manual
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HIF-STG3-1 and is the answer not in the manual?

Questions and answers

Related Manuals for Hifonics HIF-STG3-1

Summary of Contents for Hifonics HIF-STG3-1

  • Page 1 RZR Tuned Audio Package Installation Manual For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 2 INSTALL & SUPPORT tab. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 3: Warranty

    For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 4 Safety Glasses - always wear eye protection (FIG S–1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 5: Time & Tools

    You will need about 3.5 HOURS to complete this installation depending on who is “helping.” The following are a list of tools you will need for any of the Hifonics UTV/RZR Tuned Audio packages. Depending on which system you are installing, you may or may not need all of them.

  • Page 6: Chapter 1 - Preparation For Installation

    (FIG 1-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 7: Chapter 2 - Prepare Your Kick Panel Compression Horns

    PREPARATION For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 8: Chapter 3 - Prep Subwoofer Enclosure & Mount

    FIG 3-1 through 3-4. (FIG 3-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 9 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 10: Chapter 4 - Subwoofer Install Into Enclosure

    FIG 4-1. (FIG 4-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 11 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 12 OPPOSITE CONNECTOR (FIG 4-4) PREPARATION For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 13 TOOLS with the screws provided. (FIG 4-6) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 14: Chapter 5 - Remove & Reinstall The Glove Box Door

    The subwoofer is now complete. Set aside until installation and wiring. (FIG 5-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 15: Chapter 6 - Vehicle Disassembly

    Chapter 1 of this manual for clarification (FIG 6-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 16 (FIG 6-3) VEHICLE DISMANTLE For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 17 You will need to remove this in order to feed and secure the rear speaker harness For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 18 REMOVE TORX AT FRONT (FIG 6-6) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 19 FIG 6-7. (FIG 6-7) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 20 You will reuse the screw that was in the OEM piece shown in FIG 6-8. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 21 Remove 4 Torx screws from the front of the dash REMOVE TORX For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 22 PANEL POPPER TO POP THE DASH SLOWLY ACCOUNT FOR ALL DASH CLIPS For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 23 BOX BOLTS (FIG 6-9) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...

  • Page 24: Chapter 7 - Prepare Vehcile For Amplifier Mounting Plate

    CREATE A GAP (FIG 7-2) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...

  • Page 25: Chapter 8 - Source Unit & Dash Adapter Prep

    NEW ADAPTER (FIG 8-2) PREPARATION For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 26 Refer to the manual included in the source unit to mount and secure the unit into the adapter. (FIG 8-3) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 27 When set face down, the source unit should look like FIG 8-4 (FIG 8-4) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 28: Chapter 9 - Install Power Harness At Busbar

    The harness will run through the grommet shown in FIG 9-1. GROMMET (FIG 9-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 29 Use the grommet picture that has a wire look present shown in FIG 9-2. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 30 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 31: Chapter 10 - Mount The Subwoofer Enclosure

    The harness should be routed over the top of the push bar frame to the subwoofer amplifier connector. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 32 This forward pressure will be critical when you reassemble the front dash for fitment into all the clips. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 33: Chapter 11 - Mounting Amplifiers & Installation

    NOTICE THE GAP (FIG 11-2) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 34 DOWN STRAP (FIG 11-3) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 35 TPS-A500.1 AMPLIFIER SEE CHART TO ADJUST For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...

  • Page 36: Chapter 12 - Dual Amplifier & Speaker Harness Connections

    Review the full system wiring harness on Chapter 20. (FIG 12-1) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 37 FISH TAPE (FIG 12-2) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 38 LEFT SPEAKER HARNESS (FIG 12-3) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 39 ACCESS DOOR CLOSED ACCESS DOOR REMOVED For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 40 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 41: Chapter 13 - Mount Swivel Mount Adapters On Rear Pods

    RZR MAXX volume For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 42 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 43: Chapter 14 - Mounting The Kick Panel Speakers

    For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 44 FIG 14-3. (FIG 14-3) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 45 & WASHERS (FIG 14-4) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 46 Wire the speaker and illumination if present and use the supplied screws to mount the speaker to the enclosure. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 47 Hifonics speakers. (FIG 14-6) For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 48 Refer to the compression horn diaphragm replacement manual included with the speakers called HIF-POD. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 49 Repeat the process from STEP 1 – 8 for the passenger side kick panel For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 50: Chapter 15 - Dash Reassembly

    RCA cables to the dash box. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 51 The final trim should look perfect with all dash panels in place and your new source unit mounted in the dash adapter. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 52 DO NOT LOSE THE CLIP For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 53 FINAL POSITION For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 54 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 55 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 56 After the TEST & TUNE chapter has been completed, you should zip tie up any excess cables. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 57: Chapter 16 - Test & Tune

    CONFIRM ALL YOUR SPEAKERS AND AMPLIFIERS ARE CONNECTED CORRECTLY For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 58 Listen for a clear, crisp audio sound. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 59: Chapter 17 - Vehicle Reassembly

    40 foot pounds of torque For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 60: Chapter 18 - Final Inspection

    40 foot pounds of torque. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 61: Chapter 19 - Show Your Friends

    IFONICS OWER #RZRL #RZR For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...

  • Page 62: Chapter 20 - Layout Harness

    Refer to the harness layout shown on the next page to plug everything into the components. For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
  • Page 63 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.

  • Page 64: Store Name

    MODEL NUMBER SERIAL NUMBER For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 65 NOTES PAGE For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 66 NOTES PAGE For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 67 NOTES PAGE For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...
  • Page 68 For additional technical information on this and all HIFONICS products, go to the “SUPPORT” tab at HIFONICS.com There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email. ©2018 Maxxsonics USA...

Table of Contents