Hifonics HIF-STG3-1 Installation Manual page 42

Stock RZR roll cages use the 1.75 inch tube. If you have an aftermarket or custom cage you will
find the correct bushings and mounts included in the box with the pods. Refer to the manual
included with your pods for additional details on mounting and wiring.
Once the speakers are on the pipe you can gently slide your pod up or down on the tube to
determine where your final height will be. Do not fully tight the pods as you may want to adjust
for your ear height after the seat is in position and the system is playing music.
NOTE - You can now wire up the rear speaker pods. Do not zip-tie the wires along
the roll cage or gather up excess wire until the system has been full tested.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
42