Table of Contents
Advertisement
30
STEP 3 – Complete the connection at the busbar as shown in FIG 9-4. Mount the audio harness
first, with the OEM RZR connections on top. This allows you to use the red boot on the
powerline, keeping your install clean and looking factory installed.
SECURE THE RED
BOOT ON THE POWER WIRE
(FIG 9-4)
Zip-tie this power portion of the harness into place. Assure that no added wiring is near any
moving parts or components that generate large amounts of heat.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
Table of Contents
