Hifonics HIF-STG3-1 Installation Manual page 48

48
STEP 7 – With the speakers now properly wired, you can mount the speaker to the enclosure.
NOTE – The speakers shown being mounted here have already had their
compression horn covers installed. This dramatically reduces the depth of the
speaker ultimately allowing our kick panel enclosure to be shallower.
Refer to the compression horn diaphragm replacement manual included with the
speakers called HIF-POD.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA