Table of Contents
Advertisement
CHAPTER 11 – MOUNTING AMPLIFIERS & INSTALLATION
Mount your amplifier as pictures in FIG 11-1 on the dual amplifier plate.
NOTE - These instructions are always written with the assumption that both
amplifiers and all speakers are present. This is because, everyone will want to
upgrade to more sound with speakers and subwoofers.
STEP 1 - With the amplifiers mounted to the plate, slide the Dual Amp Plate into position with
the double groove portion of the bracket sliding between the steering column support shown in
FIG 11-2 and the 16mm nuts and washers. Do not tighten down yet.
MOUNTING POINTS
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
(FIG 11-1)
NOTICE THE GAP
(FIG 11-2)
©2018 Maxxsonics USA
33
POWER & SPEAKER CONNECTIONS
AUDIO CONNECTIONS
AND ACCESS
Advertisement
Table of Contents
