Table of Contents
Advertisement
17
STEP 6 – REMOVE SEATS
Remove seats by pulling on the lock clip (FIG 6-4) located between the bottom and upright
portion of the seat.
(FIG 6-4)
Behind the seats (behind the rear seat in the 4P) in the center of the machine is the panel where
you access the oil filter. You will need to remove this in order to feed and secure the rear
speaker harness
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
Table of Contents
