Table of Contents
Advertisement
ENG_TG2871CN.book 10 ページ ２００６年５月１日 月曜日 午前１１時３３分
Preparation
If you subscribe to an xDSL service
L Please attach a noise filter (contact your
xDSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 34) do not
function properly.
To single-line
telephone jack
Telephone
Noise filter
line cord
(For xDSL users)
10
Battery installation/
replacement
1
Press the notch on the cover firmly and
slide it as indicated by the arrow.
L If necessary, remove the old battery.
2
Insert the battery (1), and press it
down until it snaps into the
compartment (2).
3
Close the cordless handset cover.
Advertisement
Table of Contents
