Table of Contents
Advertisement
Temporary Confidential
TH12XX.book Page 13 Wednesday, December 19, 2007 4:17 PM
Charger
L Use only the supplied Panasonic AC
adaptor PQLV209.
A
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure (KX-TH1211/
KX-TH1212)
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
If you subscribe to a DSL/ADSL
service (KX-TH1211/KX-TH1212)
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
B
Hooks
(120 V AC, 60 Hz)
Battery installation and
replacement
Important:
L Use the supplied rechargeable
L When installing the batteries:
L When replacing the batteries:
For assistance, please visit http://www.panasonic.com/help
Preparation
properly.
To single-line
telephone
jack (RJ11C)
DSL/ADSL filter
batteries (Part No. HHR-65AAABU).
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Ensure correct polarities (S, T).
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 6, 8.
13
Advertisement
Table of Contents
