Table of Contents
Advertisement
ENG_TG2871CN.book 60 ページ ２００６年５月１日 月曜日 午前１１時３３分
Useful Information
Making/answering calls, Intercom
Problem
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
The cordless handset
and/or base unit does not
ring.
I cannot make a call.
I cannot redial by
pressing { 重拨 }.
I cannot page the
cordless handset or base
unit.
I cannot make a voice
announcement.
60
Cause & solution
L Move the cordless handset and the base unit away from
other electrical appliances.
L Move closer to the base unit.
L Raise the base unit antenna.
L If your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
L The ringer volume is turned off. Adjust it (page 21, 22).
L The night mode feature is turned on. Turn it off
(page 50).
L The dialing mode may be set incorrectly. Set the dial
mode (page 17) to match the type of telephone service
you have (tone or pulse).
L While the answering system is answering a call, or the
other cordless handset is in use, you may not be able to
make a call. Try again later.
L If the last number dialed was more than 24 digits long,
the number will not be redialed correctly.
L If you press {重拨} on the base unit after you have
started dialing, this button functions as the {暂停}
button. To redial, do not dial any numbers before
pressing {重拨}.
L The called cordless handset is too far from the base
unit.
L The called unit is in use. Try again later.
L The other cordless handset or base unit is in use. Try
again later.
Advertisement
Table of Contents
