Ebp Front Panel Features - Extron electronics eBUS Button Panel Decorator-Style Series Setup Manual

eBUS Button Panel Decorator-Style Series • Setup Guide (Continued)
To reset the firmware
The button (see figure 2,
Reset
the unit, after removing the frame (see
For all models:
Disconnect the eBUS cable that is providing power.
1.
While reconnecting power, press and hold down the Reset button (see figure 1,
2.
figure 2, A ).
Release the Reset button 1 second after reconnecting power. During the reset process,
3.
the front panel buttons are not lit. When the eBUS Status LED lights, the reset process
is complete, and the EBP is functioning normally. For the EBP 103 D, the green Link
LED lights to show that the EBP is functioning normally.

EBP Front Panel Features

All buttons are backlit with LEDs to identify the active button. Inactive buttons can be backlit
dimly to help identify them in low ambient lighting.
The buttons and encoders must be configured or programmed to carry out their functions. Use
Global Configurator Plus and Professional and Toolbelt to configure the EBP buttons and LEDs
or use Global Scripter to program the EBP buttons and LEDs.
A A
SOURCE 1
SOURCE 2
SOURCE 3
EBP 103 D EBP 105 D
C C
DISPLAY
B B
ON OFF
VOLUME
D D
AUTO IMAGE
A/V MUTE
EBP 111 D EBP 111 D
EBP Decorator-style Series Front Panels
Figure 3.
A Function buttons — The EBP 103 D has three backlit dual-color buttons. The top button has a nub that can be felt with the
finger tips. All other panels have backlit soft-touch buttons.
B Power buttons — Control the power to the display device. The
C Transmit LED — Present on certain models only, the Transmit LED blinks once when any button is pressed.
Volume control
D Volume buttons — Present on certain models only, the
E Volume LED meter — Present on certain models only, the Volume LED meter lights to indicate the volume level.
F Volume rotary encoder — Present on certain models only, the volume rotary encoder increments or decrements audio
volume.
G Mute button — Present on certain models only, the
the button so that it is backlit red when muted and white when unmuted for a visual indication of the status.
Mute
Video control
H Transport control buttons — Used to control a DVD or Blu-ray player.
2
A ) for the EBP 103 D can only be accessed from the front of
Remove the frame and bezel
DISPLAY
B B
LAPTOP
ON
A
DOC CAM VOLUME
D D
PC
PC
DVD A A
VIDEO
VIDEO
EBP 106 D
PC
A A
E E
LAPTOP
DOC CAM
HDMI
VGA
on page 4).
C C
C C
DISPLAY
B B
OFF ON OFF
E E
PC
A A
LAPTOP
VIDEO
DOC CAM
EBP 106P D EBP 106P D
D D
VOLUME
E E
F F
G G
MICROPHONE
D D
G G
MUTE
G G
EBP VC1 D EBP VC1 D EBP VC2 D EBP VC2 D
button has a nub that can be felt with the finger tips.
On
Volume buttons increment or decrement audio volume.
Mute button toggles between audio mute and unmute. You can configure
A A
D
or
EBP 103 D with Front
Figure 2.
Panel Removed
C C
DISPLAY
B B
B B
ON OFF
E E
VOLUME
D D
A A
PC VIDEO
A A
LAPTOP MUTE
EBP 108 D EBP 110 D
E E
VOLUME
H H ENT
– +
MUTE
CH + TITLE
E E
CH −
INFO
– +
MUTE
EBP NAV D
SOURCE
1
SOURCE
2
SOURCE
3
Extron
ON OFF
PC LAPTOP
DOC
VIDEO
CAM
HDMI VGA