Table of Contents
Advertisement
IPC932-230-FL User's Manual
2.3
Installing the Hard Disk Drive
The IPC932-230-FL Series offers a convenient drive bay module for users to install
HDD. The system offers users two 2.5" Hard Disk Drive for installation. Please follow
the steps:
Step 1
Turn off the system.
Step 2
Disconnect the power connector.
Step 3
Loosen screws to remove the top cover from the chassis.
Step 4
Open the top cover and locate the Hard Disk Drives as red marked.
Step 5 There is a thermal pad and 2 x HDD brackets in the accessory box, please
sticker the HDD Mylar before assembly the HDD with the bracket.
Step 6
Insert the HDD module into the HDD socket.
Step 7
Close the HDD top cover back to the chassis and fasten all screws.
20
Hardware Installation
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC932-230-FL Series and is the answer not in the manual?
Questions and answers