Specific Safety Instructions; Liabilities - DeDietrich ALEZIO S AWHP 4.5 MR User Manual

1.9

Specific safety instructions

1.10

Liabilities

Tab.1
Manufacturer's liability
Installer's liability
User's liability
7685690 - v04 - 06042020
Warning
Refrigerant fluid and pipes:
Use only R410A refrigerant fluid to fill the installation.
Use tools and pipe components especially designed for use with
R410A refrigerant fluid.
Use copper pipes deoxidised with phosphorus to carry the
refrigerant fluid.
Store the refrigerant connection pipes away from dust and
humidity (risk of damage to the compressor).
Do not use a load cylinder.
Protect the heat pump components, including the insulation and
structural elements. Do not overheat the pipes as brazed
components may cause damage.
Contact between the refrigerant fluid and a flame may result in
emissions of toxic gases.
Our products are manufactured in compliance with the requirements of the various Di­
rectives applicable. They are therefore delivered with the
ments necessary. In the interests of the quality of our products, we strive constantly to
improve them. We therefore reserve the right to modify the specifications given in this
document.
Our liability as manufacturer may not be invoked in the following cases:
Failure to abide by the instructions on installing the appliance.
Failure to abide by the instructions on using the appliance.
Faulty or insufficient maintenance of the appliance.
The installer is responsible for the installation and initial commissioning of the appliance.
The installer must observe the following instructions:
Read and follow the instructions given in the manuals provided with the appliance.
Install the appliance in compliance with prevailing legislation and standards.
Carry out initial commissioning and any checks necessary.
Explain the installation to the user.
If maintenance is necessary, warn the user of the obligation to check the appliance
and keep it in good working order.
Give all the instruction manuals to the user.
To guarantee optimum operation of the system, the user must abide by the following in­
structions:
Read and follow the instructions given in the manuals provided with the appliance.
Call on a qualified professional to carry out installation and initial commissioning.
Ask your installer to explain your installation to you.
Have the required inspections and maintenance carried out by a qualified installer.
Keep the instruction manuals in good condition close to the appliance.
1 Safety instructions and recommendations
marking and any docu­
AWHP MIV-S 9