First Login; Figure 16: Edge Gateway Manager - Setting The Administrator Password - hilscher NIOT-E-TIJCX-GB-RE User Manual

Control Panel
8.1.1

First login

Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise)
DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public
Setting the administrator password when the control panel is called
for the first time
The dialog box Set Administrator Password is displayed when the control
panel is called for the first time.
Figure 16: Edge Gateway Manager - Setting the administrator password
To set a new administrator password, proceed as follows:
Ø Enter the preset password under Current Password. With the first
commissioning, the password is:
admin
Ø Enter the new administrator password. It must have at least 7
characters. For reasons of safety, Hilscher recommends using
significantly more characters. A strong password consists of upper and
lower case letters, digits and special characters. A quality indicator in
the dialog box evaluates the password.
Weak password
Ø Click Change Password only after the entered password has been
evaluated as strong.
ð The administrator password for the user account Admin has thus been
changed.
ð As an administrator you can now use the control panel, create further
users in the user management, and assign access rights.
Mediocre password
36/292
Strong password
© Hilscher 2016 – 2019