Table of Contents
Advertisement
where hostname is the IP address of the management module and port number is the port number if
using a port other than the default 80 for http and 443 for https. The login screen appears.
3. Log in through the web browser.
Logging in through the web interface
Procedure
1. Enter the user name in the User Name field. The default user name is admin.
2. Enter the password in the Password field. The default password is admin.
NOTE: Passwords are case-sensitive.
3. Choose one of the following options:
•
Click Log In.
The HPE Adaptive Rack Cooling System web interface appears.
•
To clear the credentials, click Clear.
Only one Admin session and one User session are supported at a time. If a second session is initiated
after successful login or a console session timeout occurs, sessions can be terminated. In both
situations, the existing session is terminated and the login screen appears. Admin session logins,
logouts, and terminations are recorded in the Events Log menu. The console session timeout length
can be enabled, disabled, or modified in the Remote Access tab. The default is 30 minutes.
Configuring the leak detection alarm relay for facility
power shutdown
The connection to the alarm relays is hard wired. The ARPO cable connects to the back of the HPE
Adaptive Rack Cooling System transfer switch using a Wago connector labeled "Alarm."
Management module
61
Advertisement
Table of Contents
