Baying The Racks Together - HPE ARCS 48U User Manual

WARNING: To reduce the risk of electric shock, completely remove power before servicing by
disconnecting both power cords.
NOTE: If no secondary power is connected, the transfer switch will indicate a fail status for the
secondary power supply.
9. Guide the other ends of the power cords through the HPE Adaptive Rack Cooling System, and then
plug them into an appropriate power source.
10. Check for any errors on the display screen. If errors are displayed, see HPE Adaptive Rack Cooling
System troubleshooting.
For information on entering network settings, accessing controls, reviewing the details on the info
page, and resetting to factory defaults, see the HPE Adaptive Rack Cooling System Web Interface
Guide.

Baying the racks together

Use the foam gasket included in the HPE ARCS Air Rack Accessory Kit and the sealing tape included in
the HPE ARCS Air Rack Installation Kit to bay the HPE Adaptive Rack Cooling System and HPE ARCS
42U/48U 600x1600mm Racks together to prevent loss of air pressure within the system. Start the
installation at the HPE Adaptive Rack Cooling System and work outwards in both directions to the end of
the row.
For more information on accessory and option kits, see Accessory and option kit contents.
On the HPE Adaptive Rack Cooling Unit:
26 Installation