Accessing The Management Module Through A Terminal Emulation Program; Logging In Through The Terminal Emulation Program; Accessing The Management Module Through The Web Interface - HPE ARCS 48U User Manual

Item
5
6
Accessing the management module through a terminal
emulation program
Procedure
1. Verify that a mini-USB cable is connected between the management module and a host computer.
NOTE: Depending on your operating system, the USB connection might create a virtual serial
connection on your PC.
2. Launch a terminal emulation program.
For information about configuring the management module, see the HPE Adaptive Rack Cooling
System Web Interface User Guide.
3. Log in through the terminal emulation program.

Logging in through the terminal emulation program

Procedure
1. Enter the user name in the login field. The default user name is admin.
2. Enter the password in the password field. The default password is admin. The Main Menu screen
appears.
NOTE: Passwords are case-sensitive.
Accessing the management module through the web
interface
Procedure
1. Launch a supported browser. The browser window appears.
2. In the Address field (Microsoft
following:
http://hostname[:port number]
-or-
https://hostname[:port number] (if SSL is enabled)
60 Management module
Reference
Integrated infrared access sensor Built-in infrared proximity/door
Mini USB connection
®
Internet Explorer) or the Location field (Mozilla), enter one of the
Description
sensor.
Used for USB connections for
initial setup.