HPE FlexFabric 12900E LSXM1TGS24QGMODHB1 Quick Start Manual

Manual version: 5P101-20171120
HPE FlexFabric 12900E LSXM1TGS24QGMODHB1
1 Card identifier
The card identifier LSXM1TGS24QGMODHB1 is at the upper right corner of the front panel.
2 Specifications
CAUTION:
This card can be used only with Type H switching fabric modules, which have a character string of
SFH in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is
used with a switching fabric module that is not Type H.
NOTE:
Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching
fabric modules while the switch is operating, use the display device command.
Multiple interface cards are available for the expansion slot on the card. The following figure uses an
LSWM124XGT2Q interface card as an example.
Figure 1 Front panel
1
6
(1) SFP+ port
(3) Expansion slot
(5) QSFP+ port LED
Table 1 Card specifications
Item
Processor
SDRAM
Power consumption
Fixed ports
BOM: 3123A1NA
(JH953A) interface card
2
5
3
(2) QSFP+ port
(4) Ejector lever
(6) SFP+ port LED
Specification
MIPS64 (Dual Core) @ 1.2 GHz
8 GB DDR3 SDRAM
125 W to 296 W
•
24 × 10G SFP+ port
•
2 × 40G QSFP+ port
i
Part number: 5200-4100
4