Table of Contents
Advertisement
a. The Network Configuration menu contains all the networking options. The Network Info menu
shows the current configuration.
Main Menu
> 1
Network Configuration <
2
Network Info Page
3
System Info Page
4
Console Commands
5
Set Configuration
b. The Network Configuration menu contains networking and security settings. The IPV4 menu
contains IP address settings and the enable/disable DHCP setting. The Security menu contains
settings to allow access to http, https, or both. After changes are made, use the G menu option to
return to the network configuration menu and reboot the HPE Adaptive Rack Cooling System.
Menu Network Configuration
> 1
IPv4 Configuration <
2
IPv6 Configuration
3
DNS Configuration
4
LDAP Configuration
5
Radius Configuration
6
Modbus/TCP Configuration
7
Settings Ethernet Port
8
System Name
9
System Contact
A
System Location
B
Actual Date
C
Actual Time
D
Beeper
E
Security
F
SNMP Configuration
G
Reboot Unit
ESC=End
IPv4 Configuration
Installing the option kits
There are several option kits available for use with the HPE Adaptive Rack Cooling System. For more
information about option kits, see Accessory and option kit contents.
Installing the side panel blanks on the IT racks
To close off the racks at the end of a row, install side panel blanks on the IT racks. Installing the blanks
isolates the racks from the room environment.
NOTE: The following illustrations show panel installation on the left row end. Installation on the right row
end is the same but in mirror image.
Installing side panel blanks on a 42U IT rack
The HPE ARCS 42U Air Rack Installation Kit is for 42U racks and includes the following side panel
blanks.
36
Installation
>Auto<
> HPE Adaptive Rack Cooling System<
>Your administrator<
>Room 123 Building ABC<
>26.02.1970<
>20:08:41<
>Disabled<
>No<
Advertisement
Table of Contents
