Table of Contents
Advertisement
4.
Remove the existing striker plates from the top and bottom of the rear door.
5.
Install the lower rear door latch assembly:
•
Route the auto door harness cable through the hole and connect it to the rear door latch
assembly.
•
Align the rear door latch assembly with the screw holes.
•
Use four rear lock mount screws to install the rear door latch assemblies.
•
To prevent electrostatic discharge damage when the door is opened, apply the tape provided in
the HPE ARCS 42U Air Rack Installation Kit to the cable connection.
Installation
43
Advertisement
Table of Contents
