HPE ARCS 48U User Manual page 32

• Use two hose clamps to install each tube.
• Orient the hose barb toward the HPE Adaptive Rack Cooling System that is cooling that rack.
NOTE: The barbs on the hose must face toward the HPE Adaptive Rack Cooling System.
You might need to bend the assembly up slightly for IT clearance on installation.
• Position port holes horizontally with one side facing the IT rack and the other side facing the
extension.
3. Connect the HPE Adaptive Rack Cooling System to the pickups in the IT racks with flexible tubing.
When facing the HPE Adaptive Rack Cooling System from the front (fans showing), the pressure
reference ports are located in the upper-left side of the control box at the top of the HPE Adaptive
Rack Cooling System.
32 Installation