HPE ARCS 48U User Manual page 9

Item
1
2
The airflow of the HPE Adaptive Rack Cooling System fully supports the industry standard front-to-back
cooling—cold air pulled into the front of the server and warm air expelled out the rear of the unit. All
devices receive adequate and evenly distributed cool air regardless of the mounting position within the
rack. The HPE Adaptive Rack Cooling System distributes precisely cooled and targeted air flow evenly
across the front of the IT equipment. The HPE Adaptive Rack Cooling System and rack extensions
channel warmed air from the rear of the IT equipment into the side-mounted or center-mounted HPE
Adaptive Rack Cooling System cooling unit. From there, it is cooled and recirculated to the front of the
equipment stack.
A 6U facade comes in the HPE ARCS 48U Air Rack Installation Kit, and you can place it on top of the
HPE Adaptive Rack Cooling System to make the HPE Adaptive Rack Cooling System the same height as
the HPE ARCS 48U 600x1600mm Racks. The following illustration shows a single-unit configuration with
the 6U facade in place on the HPE Adaptive Rack Cooling System and the HPE Adaptive Rack Cooling
System doors in place.
Description
HPE Adaptive Rack Cooling System
HPE ARCS 48U 600x1600mm Rack
Overview 9