Zero Adjustment And Amplification; Examples - BONFIGLIOLI Vectron ACTIVE Manual

5.2.4
After the adjustment has been carried out, the voltage of the output signal at 0% and
100% of the reference signals can be set with the parameters
justment) and
The zero adjustment with the parameter
as a percentage of the final value of the analog output (10 V).
Via the parameter
the final value of the analog output (10 V).
In the factory setting, the zero point has been set at 0% Offset, i.e. minimum value of
the reference signal equal to 0 V output signal. The factory setting amplification equal
to 100% means that the output signal is 10 V when the reference value is reached.
5.2.4.1
The actual value parameter is mapped to the analog output signal as a function of the
selected parameters
the application-specific adaptation for an analog voltage signal.
Example 1:
10 V
Example 2:
60
60

Zero adjustment and amplification

Amplification
Amplification
Parameter
No. Description
585 Offset
586 Amplification

Examples

Offset
Parameter
No. Description
585 Offset
586 Amplification
0 V
0%
10%
Parameter
No. Description
585 Offset
586 Amplification
9.5 V
-0.5 V
586.
Offset
585 is done specific to the application
586 the amplification can be set as a percentage of
Min.
-100.00 %
5.0 %
Amplification
585 and
The setting of the parameter
0.00% and the parameter
586 to 1000.0% means that the output
signal:
− is 0 V at 0% of the reference signal,
− is 10 V at 10% of the reference signal.
100%
The setting of the parameter
to -5,00% and the parameter
tion
586 to 100.0% means that the out-
put signal:
− is -0.5 V at 0% of the reference sig-
nal,
is 9.5 V at 100% of the reference
−
signal.
Offset
585 (zero ad-
Setting
Max. Fact. sett.
100.00 %
1000.0 %
586. The following examples show
Setting
Example
0.00 %
1000.0 %
Offset
Amplification
Setting
Example
-5.00 %
100.0 %
0.00 %
100.0%
585 to
Offset
585
Amplifica-
06/05
06/05