Troubleshooting - Electrolux ESP4SL10SP User Manual

16. TROUBLESHOOTING GUIDE
Below is a list of some of the possible
malfunctions.
If the problem cannot be resolved as
described, contact Customer Services.
The coffee is not hot.
The coffee is weak or not
creamy enough.
The coffee is delivered too
slowly or a drop at a time.
Coffee does not come out of
one or both of the spouts.
Problem Possible cause
The cups were not pre-
heated.
The brewing unit has cooled
down because 2/3 minutes
have passed since the last
coffee was made.
A low coffee temperature
is set.
The coffee is ground too
coarsely.
The coffee is unsuitable.
The coffee is ground too
finely.
The coffee spouts (A7) are
blocked.
ENGLISH
Remedy
Warm the cups by rinsing
them with hot water (Please
note! you can use the hot
water function).
Before making the coffee,
heat the brewing unit by
rinsing using the rinse
function
Set a hotter coffee tem-
perature in the menu.
Turn the grinding ad-
justment dial one click
anticlockwise towards "1"
while the coffee mill is in
operation. Continue one
click at a time until coffee
delivery is satisfactory. The
effect is only visible after
delivering 2 coffees (see
section "Adjusting the cof-
fee mill").
Use coffee for espresso
machines.
Turn the grinding adjust-
ment dial one click clock-
wise towards "7" while the
coffee mill is in operation.
Continue one click at a
time until coffee delivery is
satisfactory. The effect is
only visible after delivering
2 coffees (see section "Ad-
justing the coffee mill").
Clean the spouts with a
toothpick.
25