Troubleshooting - Electrolux EBC65 User Manual

Displayed message
FILL BEAN CONTAINER
INSERT BREWING UNIT
CLOSE DOOR
GENERAL ALARM!

22. TROUBLESHOOTING

The coffee is not hot
The coffee is not creamy
enough
The coffee is delivered too
slowly or a drop at a time.
Problem
Possible cause
The coffee beans have run
out.
The brewing unit has not
been replaced after clean-
ing.
The service door is open
The inside of the appliance
is very dirty.
Possible cause
The cups were not pre-
heated.
The brewing unit has
cooled down because 2/3
minutes have elapsed since
the last coffee was made.
The temperature set is too
low.
The coffee is ground too
coarsely.
Wrong type of coffee
The coffee is ground too
finely.
ENGLISH
Remedy
Fill bean container
Insert the brewing unit as
described in the section
"Cleaning the brewing unit".
Close the service door.
Clean the inside of the
appliance thoroughly, as
described in the section
"Cleaning and mainte-
nance".
If the message is still dis-
played after cleaning, con-
tact a customer services.
Remedy
Warm the cups by rinsing
them with hot water.
Before making coffee,
preheat the brewing unit
by selecting the RINSING
function in the menu.
Change the set tem-
perature (see paragraph
"Changing coffee tempera-
ture").
Turn the grinding adjust-
ment knob one click
anticlockwise towards "1"
while the coffee mill is in
operation.
Use a type of coffee for
espresso coffee makers.
Turn the grinding adjust-
ment knob one click clock-
wise towards "7" while the
coffee mill is in operation.
Continue one click at a
time until coffee delivery is
satisfactory.
The effect is only visible
after delivering two coffees.
23