Mounting The Lp-8X2X - ICP DAS USA LP-22 Series User Manual

2.1.3. Mounting the LP-8x2x

Wall/Panel mounting
The LP-8x2x can be mounted either directly to a wall/panel or onto a standard 35mm DIN-Rail.
Step 1: Install the four mounting screws
into the 4 keyhole mounting
holes.
Step 2: Fasten the screws securely.
Tips & Warnings
There must be a minimum clearance of 50mm between the LP-8x2x and the top
and bottom side of the enclosure panel.
AM335X-PAC Series User Manual
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved.
version 2.0.1 Page: 13
E-mail: service@icpdas.com