Table of Contents
Advertisement
Step 6: Use the 'ifconfig' command to display the current configuration information for the
network interface, as illustrated in Figure 7.2-3.
Figure 7.2-3. Checking the IP address that has been assigned to the br0 interface
Step 7: Use the
'mstpctl showbridge
br0' command to verify that the
'force protocol
version' is
set to
RSTP
mode, as illustrated in Figure 7.2-4.
Figure 7.2-4. Check that the MSTPD service is correctly configured
AM335X-PAC Series User Manual
version 2.0.1
Page: 118
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: service@icpdas.com
Advertisement
Table of Contents
