ICP DAS USA LP-22 Series User Manual page 79

Use SSH to access LinPAC and execute program
(1) Putty – the free PuTTY is an SSH and telnet client. Download PuTTY tool:
http://www.putty.org/
(2) Open a 'Putty Prompt' and type the IP Address of the LinPAC, and the connection type is set to
SSH. When prompted, type the User_Name and Password to establish a connection to the
LP-8x2x. If the '#' prompt character is displayed, it signifies that a connection to the telnet
server on the LP-8x2x has been successfully established. (refer to Figure 4.3.3-6)
(3) Type the 'chmod
helloworld.exe file. Type the
and verify the permissions assigned to the 'helloworld.exe' file. This means that the file is
executable. Execute the './helloworld.exe' file by typing and the message 'ICPDAS hello world!'
will be displayed.
The compile, transfer and execution processes are now complete. (refer to Figure 4.3.3-7)
AM335X-PAC Series User Manual
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved.
Figure 4.3.3-6. Establish a connection to the telnet server
777 helloworld.exe' command to change the permissions for the
'ls -l' command again to list all the files in the /root directory
Figure 4.3.3-7. Modify the permissions of files
version 2.0.1 Page: 79
E-mail: service@icpdas.com