Table of Contents
Advertisement
mkfs.minix: this command is used to make a MINIX filesystem
Parameter
create a Linux MINIX file-system
check the device for bad blocks before
-c
building the file system
mkfs.vfat: this command is used to make an MS-DOS filesystem
Parameter
-A
use Atari variation of the MS-DOS filesystem mkfs.vfat -A /dev/mmcblk0p1
-v
verbose execution
6.2. Using a USB Storage Device
USB storage devices are not automatically mounted to the LinPAC AM335x PAC, set it must be
manually mounted before attempting to access the USB storage device. (Refer to Figure 6.2-1)
AM335X-PAC Series User Manual
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved.
Description
Description
Figure 6.2-1. Checking that the USB storage device is on disk
mkfs.minix /dev/mmcblk0p1
mkfs.minix -c /dev/mmcblk0p1
mkfs.vfat -v /dev/mmcblk0p1
version 2.0.1
Example
Example
Page: 98
E-mail: service@icpdas.com
Advertisement
Table of Contents
