2.1
UNPACKING THE FIRE
Carefully lift the fire out of the carton. Remove the loose item packaging carefully
from the front of the appliance. Check the contents as listed :-
Packing Check List
1 off
Fire box / burner assembly
1 off
Boxed ceramic base, front ceramic rail and 20 coals (18 large, 2 small)
1 off
Trim
1 off
Fender and ashpan cover (boxed)
1 off
Loose items bag, which includes (where applicable) :-
1 off
Remote control handset (RC models only)
1 off
Restrictor baffle (all models)
1 off
Cable fixing kit (all models)
1 off
45mm grommet (all models)
1 off
Installation & user instruction book (all models)
3 off
1.5V batteries (EFC models only)
5 off
1.5V batteries (RC models only, 3 off for control valve, 2 off for handset)
1 off
1.5V battery (SC models only)
1 off
Guarantee card (all models)
2.2
INSTALLING THE FIRE BOX
Establish which type of flue you are intending to install the fire in to :-
225 x 225mm (9 inch x 9 inch) brick built chimneys of 3 metre minimum
effective flue height.
175mm (7 inch) diameter lined brick or stone flue, insulated pre-fabricated
metal flue box to BS 715 / BS EN 1856-2 of 3 metre minimum effective flue
height.
When installing into 125mm (5 inch) diameter lined brick or stone flue, or
insulated pre-fabricated metal flue box to BS 715 / BS EN 1856-2. the
restrictor baffle must not be fitted.
A spillage test must always be carried out to check satisfactory
clearance of flue products, regardless of the type of flue the
appliance is being fitted to.
SECTION 2
INSTALLATION OF FIRE
10