Emerson Rosemount 148 Reference Manual page 30

Configuration
June 2019
Sensor temperature
Analog output (mA)
Transmitter
temperature
Status indicator
buttons
Device identification
30
The sensor temperature readings are displayed in the units set
in the Basic Settings.
Displays the transmitter output, read by the host system, in
milliamperes.
Shows the reading used by the onboard RTD to compensate
the cold junction of thermocouples.
Two buttons that indicate if the device is in Sensor Malfunction
or Transmitter Malfunction.
This shows revisions for the software, hardware, and final
assembly number.
Reference Manual
00809-0100-4148
www.Emerson.com