Recovering Saved Data; Lubricating The Machine - Bernina 435 Instruction Manual

Setup Program
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Save data on USB Stick».
> Touch the icon «Update» to start the update of the firmware.
Update Update

Recovering saved data

NOTICE The BERNINA USB stick (optional accessory) has been removed too early
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
If personal data and settings after a software update are not available anymore, they can be transfered to
the machine again afterwards.
> Insert the BERNINA USB stick (Optional accessory) providing the saved data and settings into the USB port
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Transfer saved data to machine».

Lubricating the machine

Electronically driven components
CAUTION
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
Lubricating the hook
NOTICE
Too much oil can pollute the fabric and the thread.
> Always sew a test sample first.
56
– The icon is checkmarked in green.
successfully.
of the machine.
– The icon is checkmarked in green.