Cleaning The Thread Catcher; Lubricating The Machine - Bernina 500 E Manual

Setup Program
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Transfer saved data to machine».
– The icon is checkmarked in green.

Cleaning the thread catcher

In chapter «Maintenance and cleaning» there are additional illustrated step-by-step instructions.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Clean the thread catcher».
> Clean the thread catcher according to the instructions on the display.

Lubricating the machine

CAUTION
Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
NOTICE
Lubricating the hook
Too much oil can pollute the fabric and the thread.
> Always sew/embroider a test sample first.
In the Setup Program, animations show how to lubricate the machine. In chapter «Maintencance and
cleaning», there are further illustrated step-by-step instructionsLubricating the machine. Always use BERNINA
oil to lubricate.
> Touch the icon «Home».
64