1MAC051065-MB K
6.5
615 series ANSI
Installation Manual
Exchanging protection relay
•
To exchange the protection relay with another identical unit, remove the protection
relay and install the new one.
The exchangeable units can be found from the PartsOnLine system, see
www.abb.com/partsonline. Use of PartsOnLine requires user registration.
•
To exchange a protection relay to a different unit, change the case and connect the
wires.
•
When replacing only the plug-in unit for maximum system availability, check that the
order number of the case and the spare plug-in unit are equal to ensure the type
compatibility.
The serial numbers of the original case and the spare plug-in unit are temporarily
mismatched. For matching the serial numbers, replace also the case of the spare unit
as soon as possible, for example, during the next scheduled maintenance break.
Removing, repairing and exchanging
Section 6
63